Wine Enthusiast 237870287 Příručka a uživatelská příručka stáhnout pdf (Strana 12)

Power: Turns the Wine Cellar System ON and OFF

Lighting: Turns the Interior Light ON and OFF

Power & Lighting: Press Both Simultaneously to Lock or Unlock the Control Panel

Temp Up & Down: Single Zone Only – Pressing together alters the

Temperature Display to Fahrenheit or Celsius

°C/°F: Dual Zone Only - Alters the Temperature Display to

Fahrenheit or Celsius

Display Window: Displays Temperature

Temp. Up Increases Set Temperature

Temp. Down Decreases Set Temperature

Before You Start

The wine cellar should be placed in a location where the ambient temperature is between

60-80° Fahrenheit. If the ambient temperature is above or below this range, the

performance of the unit may be affected. For example, placing your unit in extreme cold

or hot conditions may cause interior temperatures to fluctuate.

Setting the Temperature Control

NOTE: The temperature readout shows the actual cellar temperature, it will

temporarily show the set temperature while making adjustments, then reverts

back after 10 seconds.

1. Make sure power cord is connected to a properly grounded outlet.

2. Turn power ON.

3. Use the Zone Select (Dual Zone models only) to select the Upper or

Lower zone. Upper zone must be set 4°F colder than lower zone.

4. Set the desired temperature by pushing the UP or DOWN button.

5. Temperatures increase or decrease 1°F with each push of the UP or

DOWN button.

NOTE: Temperatures may fluctuate depending on whether the interior light is ON

or OFF and depending on the position of the bottles.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

Wine Enthusiast 237870287 Příručka a uživatelská příručka Strana 12